I bought this freedom scooter at a local on-line auction and I nee help identifying it to acquire the parts I need for it. I looked everywhere for a model or serial number with no luck. It does not have a key nor battery(s). I found a bunch of loose wires under the frame and have no idea what they go to.
This razor scooter charger made originally for ezip e175.may be compatible with other razor chargers( not guaranteed) output: 24V 600mA.input: AC 100-120V 50/60Hz 1.2A. previously used to charge my razor e175.Good condition.appears to work fine.comes as-is.3 prong end compatible with razor e175 No international shipping No refunds AS-IS Any.

How the engine years are worked out:

It is to the best of my knowledge but could easily have mistakes. That’s why I want people to try it and see if I am accurate with bikes that they actually own.
For most models, the frame prefix and engine prefix are unique. For example the last GS150 model started with a frame number of VS5T*52364* and a motor number of VS5M*52364* for the year of 1959. It is rare that the frame and motor numbers are the same but I am assuming they reflect the same year range (ex: frame numbers VS5T*52364* to VS5T*70128* denote a 1959 bike so I assumed that engine numbers VS5M*52364* to VS5M*70128* denote the same year range for motors).
Some models don’t fall into this assumption because two models shared the same motor. The TS125 and the P125X share the same VNL3M*xxxxxx* motor prefix and the Rally 200 and all further 200 models all share the same VSE1M*xxxxxx* motor prefix so here’s what I assumed for this search engine:
VNL3M: There were 28744 125TSs made starting with VNL3M*001101* so I assumed the P125X numbers start at VNL3M*29846*
VSE1M: There were 41274 Rally 200s made starting with VSE1M*001001* so I assumed the P200E engine numbers start at VSE1M*42275*. There was a large jump in numbers between the P200 and PX200 so I returned the motor numbers to matching the frame numbers from the PX200 on.
I don’t know for sure if any other models share engines but I suspect that the Vespa 90SS and the Vespa 90R share the same V9SS1M motor serial prefix.

This forum is in read-only mode. Please continue to browse, but replies are disabled for now. Why?

24V 1.5A - Razor E100 E125 E200 E300 MX350 E500 PR200 Scooter Charger We don't have the razors anymore Brake Lever w/Cable for Razor MX350 and MX400 Electric Dirt Bike Pit Bike Parts. Razor USA Recalls certain PowerWing Scooters Due to Laceration Hazard. October 5, 2007. Razor recalls select E300 Electric Scooters. Razor recalls PowMax Battery Chargers. Affected Serial Numbers: Any number that starts with B2#####, B3#####, B4##### View CPSC Press Release.

Need help identifying electric scooter.

Marritt

I bought this freedom scooter at a local on-line auction and I nee help identifying it to acquire the parts I need for it. I looked everywhere for a model or serial number with no luck. It does not have a key nor battery(s). I found a bunch of loose wires under the frame and have no idea what they go to. If it can be identified, is there an electrical wiring schematic available and a parts list breakdown.

Thank anyone for assistance.

(1.65 MB)

ESP Support said about 4 years ago

Those three wire key switches are very hard to find. We will be getting a new batch of the three wire key switches very soon, probably within a week. I will let you know as soon as we get them back in stock.

1 person has this question

ESP Support

Since you can't find them, fortunately the model and serial number will not do any good when trying to locate parts for that scooter. There are no wiring schematics or parts list breakdowns available for Freedom scooters. It can be fixed though by wiring the scooter from scratch with a new speed controller and following its wiring directions.

Razor Scooter Serial Number Lookup

The fastest way to get it going would be to get the motor running and not worry about getting the lights working at first. You could always go back and rewire the lights so they work after getting the motor running. It would be easiest to drill a hole in the body of the scooter for a toggle or key switch, rather than try to get the key switch working in its original position under the handlebars.

To figure out how many batteries it needs for the battery pack and what Voltage and Wattage the controller should be I would check to see if there is a sticker on the motor that indicates its Volts and Watts. If the motors Volts and Watts are known any brushed motor speed controller with the same Voltage and Wattage rating could be used for the scooter. Depending upon the motor and speed controller Voltage, the number of batteries for the battery pack could be decided. If it is a 24 Volt scooter then it will use 2 batteries for the battery pack, if it is a 36 Volt scooter then it will use 3 batteries for the battery pack.

If the motor does not have a sticker on it or the motors sticker does not have the Volts and Watts printed on it then the Voltage of the scooter may be found on the battery charger identification sticker. The battery charger will not indicate the Watts of the motor however most Freedom scooters are between 250 and 500 Watts so a 500 Watt speed controller would be a good choice becuase it will run motor rated between 250 and 500 Watts.

I recommend not using the scooters original wiring harness and starting from scratch on the wiring. For wire I would use 12 gauge wire for the battery pack to speed controller wires, and for the speed controller to motor wires if you need to extend them. The original wires may be 14 gauge but it is good to upgrade to 12 gauge wire since it will only cost a few pennies more and will make the scooter more reliable.

Here is a basic wiring drawing for an electric scooter which indicates how to hook up all of the components:

The speed controllers wiring directions will precisely indicate which wires to connect to which parts. Wiring an electric scooter is as simple as it looks in the drawing. Its just a matter of wiring a few parts and components together to the speed controller. If you have any questions or need any suggestions for which parts to choose after you investigate the Voltage and Wattage of the motor please let me know.

Marritt

Thank you for your assistance. I will check the motor to see if it has a sticker. I did not get a charger with the scooter. Do the battery(s) have a special connector?

ESP Support

Most batteries have 1/4' (6.3mm) wide push on connectors, some have internal threads that small bolts thread into, and some have posts with holes in them that small nuts and bolts go through to mount the wiring harness wires onto. None of the connectors that attach to batteries are special, they can all be found at local auto parts and hardware stores. The connector on the battery pack wiring harness that attaches to the speed controller is usually a special connector though which is only available from a store that sells electric scooter and bike part.

Razor Scooter Serial Number Lookup

Marritt

The motor on the scooter shows model MY1018 chain drive. It is a 24V 250W and show current output 14A. What Speed Controller, batteries and wiring harness should I purchase? Also which battery charger should I get?

ESP Support

Here are the parts I recommend for your scooter:

Speed Controller: Item # SPD-24250 Add to Cart

Batteries: Item # BAT-12V12AHX2 Add to Cart - or Item # BAT-12V15AHX2 Add to Cart

Battery Harness: Item # HNS-100 Add to Cart

Battery Charger: Item # CHR-24V1.6A3P Add to Cart

The 15Ah batteries will provide around 20% more range or ride time than the 12Ah batteries. They are both the exact same size though. The 15Ah batteries weigh around 20% more than the 12Ah batteries do.

Please let me know if you have any questions.

Marritt

Thank You for your assistance. I will let you know how it works after Iget the parts and install them.

Need help identifying electric scooter.

Marritt

ESP Support

Razor Scooter Serial Number Lookup

Marritt

ESP Support

Razor Scooter Serial Number Lookup

Marritt

ESP Support

Marritt

Kelly Robinson